Part Number Hot Search : 
KT1210 512K8 LM2904 20CJQ045 MP8712 40183A 12425 5815M
Product Description
Full Text Search
 

To Download IRM-2638TF4 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module
IRM-2638TF4
Features
* Photo detector and preamplifier in one package * Internal filter for PCM frequency * Improved inner shielding against electrical field disturbance * TTL and CMOS compatibility * Low power consumption * Improved immunity against ambient light * Suitable burst length 10 cycles/burst * Pb free * BiCMOS manufacture IC ; ESD HBM>4000V ; MM>250V * The product itself will remain within RoHS compliant version.
Descriptions
The IRM-2638TF4 is miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. IRM-2638TF4 is the standard IR remote control receiver series, supporting all major transmission codes.
Applications
Light detecting portion of remote control AV instruments such as Audio, TV, VCR, CD, MD, etc. Home appliances such as Air-conditioner, Fan , etc. The other equipments with wireless remote control. CATV set top boxes Multi-media Equipment
PART Chip Compound
MATERIAL Silicon Epoxy
COLOR Black Black
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
Rev 1
Page: 1 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Package Dimensions
OUT GND Vcc
Notes: 1.All dimensions are in millimeters.
2.Tolerances unless dimensions 0.3mm. Unit:mm
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
Rev 1
Page: 2 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Absolute Maximum Ratings (Ta=25)
Parameter Supply Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Vcc Topr Tstg Tsol Rating 0~6 -25 ~ +80 -40 ~ +85 260 Unit V 4mm from mold body less than 10 seconds Notice
Recommended Operating Condition
Supply Voltage Rating: Vcc 4.5V to 5.5V, TYP. 5V
Electro-Optical Characteristics (Ta=25, and Vcc=5V)
Parameter Consumption Current B.P.F Center Frequency Peak Wavelength Reception Distance Half Angle(Horizontal) Half Angle(Vertical) High Level Pulse Width Low Level Pulse Width High Level Output Voltage Low Level Output Voltage Symbol Icc Fo p L0 L45 h v TH TL VH VL MIN. ------14 6 ----400 400 4.5 --TYP. 1.2 38 940 ----45 45 ------0.2 MAX. --------------800 800 --0.5 deg deg s s V V At the ray axis *2 At the ray axis *1 Unit mA KHz nm m Condition No signal input
Notes: *1:The ray receiving surface at a vertex and relation to the ray axis in the range of = 0 and =45. *2:A range from 30cm to the arrival distance. Average value of 50 pulses.
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064 http:\\www.everlight.com Prepared date26-Dec-06 Rev 1 Page: 3 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Test Method
The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance. Measurement place A place that is nothing of extreme light reflected in the room. External light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee10Lux) Standard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However , the infrared photodiode to be used for the transmitter should be p=940nm,=50nm. Also, photodiode is used of PD438B(Vr=5V). (Standard light / Light source temperature 2856K). Measuring system According to the measuring system shown in Fig.-3
Block Diagram
Vs
IN Input CGA & filter Demodulator
OUT C
Oscillator
Carrier frequency f0
AGC/ATC & digital control
Modulated IR signal min 10 pulses
GND
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
Rev 1
Page: 4 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Application Circuit
RC Filter should be connected closely between Vcc pin and GND pin.
Fig.-1
Transmitter Wave Form
D.U.T output Pulse
Duty=0.5
Fig.-2
Measuring Method
mc02
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
Rev 1
Page: 5 of 10
Prepared bychen xin
tuoV
noitceriD lacitreV & latnoziroH fO elgnA :
ccV
DNG
TUO
ecnatsiD noissimsnarT :L
T.U.D

ECIVED FO ESLUP TUPTUO
rettimsnarT dradnatS
.tcudorp hcae fo ycneuqerf retnec ot detsujda si ycneuqerf reirraC
V1.0 0.5+ tuoV epocsollicsO Fu01 k01
1 0 0 k
rettimsnarT dradnatS
MROF EVAW TUPTUO RETTIMSNAT RI
Fig.-3
Measuring System
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
The Notice of Application:
Transmission of remote control signal consist of four parts: Encode Part, IR Transmitter Source, IRM device, Decode Part 1. When IRM-2638TF4 code select frequency, it need to well understand the center system of encode part. 2. Strong or weak light of IR Transmitter can affect distance of transmission. 3. When using IRM-2638TF4 device, it requires the composition of code pattern to reach the demand as follows:
Minimum tburst ( number of pulses per burst) 10 pulses
Minimum tburst_gap ( number of pulses between two burst) 14 pulses
Minimum tpause
25 msec
4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range. If the above items hardly assure of its application, it'll cause NG(no good) message from the edge of signal.
IRM-2638TF4 Code Property:
Data format NEC RC5 _ Philips RC6 _ Philips RCA _ Thomson Toshiba Sharp JVC O O O X O O O Data format Sony 12 Bit Sony 15 Bit Sony 20 Bit Matsushita Mitsubishi Zenith High data rate (4000 bit/s)
http:\\www.everlight.com Prepared date26-Dec-06
O X X O O O X
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
Rev 1
Page: 6 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Typical Electro-Optical Characteristics Curves
Fig.-4 Relative Spectral Sensitivity vs. Wavelength Fig.-5 Relative Direction Transmission Distance vs.
Relative Transmission Distance (%)
80 60
40
20
0 -60 -40 -20 0 20 40 60
Angle (deg)
Fig.-6 Output Pulse Length vs. Arrival Distance
Fig.-7 Arrival Distance vs. Supply Voltage
5.71
Output Pulse Width TWL (sec)
Transmission Distance Lc (m)
Transmission Distance Lc (m)
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
5.01 0.7 5.3
0
2.7 3.0 3.3 3.5 3.8 4.1 4.4 4.7 5.0 5.3 5.5
61
41
21
01
8
6
4
2
0
Supply Voltage Vcc (V)
Rev 1
Page: 7 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Typical Electro-Optical Characteristics Curves
Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency Fig.-9 Arrival Distance vs. Ambient Temperature
Transmission Distance Lc (m)
20 25 30 35 40 45 50
90
Relative Distance (%)
80
50
Carrier Frequency (KHz)
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
5.3
60
0.7
70
0.41 5.01
5.71
Ambient Temperature Ta (C)
Rev 1
Page: 8 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Reliability Test Item And Condition
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Items Test Conditions 1 cycle -40 Temperature cycle +100 n=22,c=0 Failure Judgement Criteria Samples(n) Defective(c)
(15min)(5min)(15min) 300 cycle test Temp: +100
High temperature test Vcc:6V 1000hrs Low temperature storage High temperature High humidity Temp: -40 1000hrs Ta: 85,RH:85% 1000hrs Temp: 2605 10sec 4mm From the bottom of the package.
L0 Lx0.8 L45 Lx0.8
n=22,c=0
n=22,c=0 L: Lower specification limit n=22,c=0
Solder heat
n=22,c=0
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
Rev 1
Page: 9 of 10
Prepared bychen xin
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638TF4
Packing Quantity Specification
1. 1500 PCS/1Box 2. 10 Boxes/1Carton
Label Form Specification
CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: None REF: Reference LOT No: Lot Num ber MADE IN TAIWAN: Production Place
IRM-2638TF4
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com
Everlight Electronics Co., Ltd. Device NoSZDMO-026-064
http:\\www.everlight.com Prepared date26-Dec-06
Rev 1
Page: 10 of 10
Prepared bychen xin


▲Up To Search▲   

 
Price & Availability of IRM-2638TF4

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X